|
|

|
 |
|
|
Covermate Covers
For Hot Tubs And Spas
The unique design of the Covermate I
allows the spa cover to be easily removed and stored
in the open position. The spa cover stands
approximately half way above the spa lip, while
requiring as little as 10 " clearance behind the spa.
With Covermate I, removing the spa cover from the
inside or outside of the spa requires very little
strength or effort. The Covermate I is designed to not
flex or torque when being operated from outside the
spa.
The Covermate I's 12 point, 14" mounting system
provides extreme strength
|
|

|
|
Remove that bulky spa cover
effortlessly. The CoverMate I handles spa covers with
ease! The placement location of the supporting
brackets allow you to "park" the lid in the open
position to provide a wind or privacy screen. Requires
a 12" clearance behind the spa. Will accommodate
covers up to 96".
In addition to the standard CoverMate1, there are two
specialty versions for specific spa brands. One for
Sundance/Sweetwater Spas and another for Arctic Spas.
These two variations are designed to accommodate the
unique wood skirting of these brands of spas.
|
 |
There's also the Wide CoverMate1 for
covers over 8' in width (up to 8½"), and the Extended
Bracket CoverMate1 for spas with radius corners over
10" or cut corners over 14".
Installed on a Bullfrog brand spa, these pictures show
the Covermate 1 with the special "extended mounting
brackets" for spas with rounded corners that are a
radius over 10".
 |
 |
|
Shown here is the specialized mounting
bracket, specific to Sundance/Sweetwater brand spas.
This particular style is designed to accommodate the
unique style of both their synthetic and wood
cabinets. |
 |
|
 |
 |
|
Copyright © 2010
Hot Spring Spa's Of Sioux Falls, Inc.
All rights reserved |
Hot Spring Spa's Of Sioux Falls, Inc.
3827 S. Western Avenue
Sioux Falls, SD 57106
Phone: 605-361-3323 Fax:
605-362-6247
hotspringssiouxfalls@gmail.com
|
|
|